Skip to content 
Effective quality control for flexible stone is the primary defense against installation failures and costly project callbacks. The new materials market is filled with unverified claims, and specifying a single bad batch can lead to delamination or cracking, erasing project margins and damaging your reputation.
This guide provides five checkpoints to validate material integrity before you order. We benchmark products against verifiable standards like the Class A2 fire rating and ISO 9001 certification, analyzing backing material integrity and performance in -40°C deep freeze tests to ensure you source a reliable material.
The “Wild West” of New Materials
The new materials market is filled with unverified claims. We provide reliability with verifiable data, holding key certifications like ISO 9001 and Class A2 fire ratings to prove quality.
Innovation Outpacing Standardization
The building materials market is flooded with new products. Innovative materials are entering commercial use much faster than global testing standards can keep up. This creates a fragmented and risky environment for buyers, where suppliers often make bold performance or sustainability claims without any consistent, verifiable proof to back them up.
Verifiable Performance and Factory Certifications
We cut through the noise with documented proof. Instead of just making claims, we provide the data architects and contractors need to specify with confidence. Our factory and products are validated by internationally recognized standards.
- Factory Certifications: We operate under strict quality and environmental management systems, holding ISO 9001, ISO 14001, and CE certifications.
- Fire Safety: Our products achieve a Class A2 (Non-combustible) fire rating, a critical requirement for commercial and residential projects.
- Extreme Climate Resistance: The material is proven to withstand extreme conditions, passing -40°C deep freeze tests without damage or delamination, making it suitable for cold climates in Russia and Canada.
5 Quality Checkpoints for Flexible Stone
Quality isn’t a single feature; it’s a series of verified checks. These five points separate reliable, project-ready flexible stone from materials that create costly problems down the line.
| Quality Checkpoint | What to Look For |
|---|---|
| 1. Backing Material Integrity | The backing is the material’s structural foundation. A weak or poorly bonded backing leads to delamination and failure. Inspect the fiber mesh to ensure it’s fully integrated with the stone layer, with no signs of peeling at the edges or corners. This bond provides the tensile strength required for bending and installation. |
| 2. Color Consistency & Depth | High-quality flexible stone should have a clear, natural texture and uniform color without artificial, repeating patterns. Visually inspect sheets for defects like bubbles, cracks, or inconsistent finish. The pattern should look sharp and authentic, reflecting the properties of real stone, not a printed image. |
| 3. Flexibility without Cracking | The core function is flexibility. A good product can be bent around columns and curved walls without the stone surface cracking or flaking off. A key performance metric is its bendable diameter. Our standard requires the material to handle a tight 200mm diameter curve, ensuring structural integrity in demanding architectural applications. |
| 4. Dimensional Stability | This ensures the material resists warping, bulging, or shrinking under thermal stress. It’s critical for exterior facades exposed to fluctuating temperatures. Look for proof of performance in extreme weather, such as successful freeze-thaw cycle testing down to -40°C. This stability prevents long-term installation failures. |
| 5. Factory Certifications | Certifications are non-negotiable proof of a manufacturer’s commitment to quality and safety. They validate that production processes meet international standards. Always verify that the supplier holds current certifications, such as ISO 9001 for quality management, ISO 14001 for environmental standards, and CE for market access in Europe. |
Luxury Stone Finishes, Made Lightweight & Flexible
Requesting Samples & Lab Reports
Provide clear project details to get the right samples. We offer 3-day rapid sampling and provide key lab reports, like our Class A2 fire rating, to verify performance.
Getting the right material for your project starts with a clear request. We don’t just send out random samples; we match them to your specific needs. The more information you provide upfront, the faster we can get a relevant, useful sample into your hands.
Essential Information for Your Request
To ensure we provide the most accurate samples and a precise quotation, please include these details in your request. This helps us understand the technical and aesthetic requirements from the start.
- Project Application: Is this for an exterior façade, a commercial interior, a hotel renovation, or another specific use?
- Climate Conditions: Where is the project located? We need to know if it’s in a high-heat region like the Middle East or a deep-freeze zone like Canada or Russia.
- Desired Texture and Style: Let us know the specific texture series (e.g., Travertine, Concrete) and any style codes you have in mind.
- Required Certifications: Inform us of any mandatory local compliance standards or project-specific certifications needed for approval.
Our Rapid Sampling and Available Reports
We back our products with a fast sampling process and the documentation you need to verify performance. These reports are not just marketing claims; they are third-party validated results that confirm our material meets critical standards for safety and durability.
- 3-Day Rapid Sampling: Using 3D printing technology, we can create and ship custom texture samples just three days after confirming your design.
- Factory Certifications: We provide copies of our core factory certifications, including ISO 9001 (Quality Management), ISO 14001 (Environmental Management), CE, and BSCI (Business Social Compliance Initiative).
- Key Performance Lab Reports: We offer access to crucial lab test results to meet project specifications, including our Class A2 Fire Rating for non-combustibility and the Extreme Weather Resistance report showing no damage after freeze-thaw cycles at -40°C.
Frequently Asked Questions
What are your flexible stone panels made of?
Our panels are a composite material made from natural stone powder and modified clay (MCM), reinforced with a fiber mesh backing. This is not plastic or vinyl; it’s reconstructed natural stone fused with specialized polymers. The final product is engineered for flexibility and light weight, at only 3.5 to 6.0 kg per square meter.
How are the panels installed?
Installation uses a direct adhesion method with structural adhesive, which is simpler than standard tiling. You can cut the panels with a utility knife and apply them directly over various surfaces like concrete, drywall, or even old ceramic tiles. The process is low-noise and dust-free, making it perfect for renovations that can’t afford business interruption.
Are these panels suitable for exterior use in extreme climates?
Yes, they are engineered for extreme weather. The panels carry a Class A2 fire rating and are proven in high-heat, UV-intensive regions like the Middle East. They also perform in extreme cold, passing freeze-thaw cycle tests down to -40°C without cracking or delamination, making them ideal for markets like Russia and Canada.
What is the minimum order quantity (MOQ)?
Our standard MOQ for LCL (Less than Container Load) shipments is 200 square meters. For full container orders, we allow mixing different styles, but require a minimum of one pallet—about 130 m²—for each style selected.
Can you customize colors and textures for a specific project?
Absolutely. We offer project-level customization. Using our 3D rapid sampling technology, we can produce and ship custom samples based on your design files within three days. The minimum order for fully custom OEM projects starts at 500 square meters.
How much does a panel weigh and how is it shipped?
A standard 1200 x 600 mm panel is only 2.5-5.0mm thick and weighs between 3.5 to 6.0 kg/m², which is about one-sixth the weight of traditional stone. We ship globally, and all products are packed securely in cardboard boxes on fumigation-free wooden pallets to ensure they arrive safely.
Final Thoughts
Lower-priced panels often skip the essential certifications, creating hidden liabilities for your projects. Specifying a product without a verified Class A2 fire rating or proven -40°C freeze resistance is a commercial risk. This level of quality isn’t a feature—it’s the foundation of your reputation and margin.
Don’t rely on claims—verify the material yourself. Our 3-day rapid sampling service gets a custom texture into your hands for physical testing. Contact our team to get the lab reports and discuss your project’s specific requirements.
English 
Spanish 
French 
Arabic 
German